Moving And Unpacking; Setting Up The Appliance - hanseatic AC928A2CA Gebrauchsanleitung

Do not put the appliance in a closet.
■
Never remove the cover that is fas-
■
tened inside the cooking chamber!
It serves to protect the magnetron,
which emits the microwaves.
Do not operate the appliance with an
■
external timer or a separate remote
control system.
If smoke is emitted, turn off or unplug
■
the appliance and keep the cooking
chamber door closed to smother any
fl ames.
NOTICE
Improper handling of the appliance
may result in damage.
Do not use sharp objects to unpack
■
the appliance.

Moving and unpacking

• Move the appliance with the help of a
second person.
• Carefully unpack the appliance and re-
move all packaging, plastic moulding, ad-
hesive strips and foam padding from the
inside, outside and back of the appliance.
Start-up

Setting up the appliance

Place the appliance on as flat and as firm and
heat-resistant a base as possible.
• Take into account the following points:
– The appliance should not be positioned
directly next to a refrigerator or deep
freezer. The heat emitted from the ap-
pliance would cause unnecessarily high-
er energy consumption by the fridge or
freezer.
– There must be a minimum spacing of 2
m from radio appliances and televisions,
to ensure that the reception is not dis-
torted.
– The base upon which the appliance
should be positioned must be level, suf-
ficiently stable and heat resistant.
– Never remove the adjustable feet.
– When selecting a location for the appli-
ance, please ensure to choose a place
away from heat, steam or high air hu-
midity. The appliance may not be used
outdoors.
– Do not set up the appliance above a hob
or other heat-generating appliances.
This could damage the appliance.
– Please ensure that no highly flammable
materials are located in the vicinity of the
appliance.
– The socket must be near the device and
easily reachable, to allow the plug to be
pulled out quickly in the event of any
malfunction.
– In order to ensure sufficient air circula-
tion, the following minimum lateral and
vertical distances must be complied with:
Upwards:
Backwards:
To the left:
To the right:
– As measured from the base, the installa-
tion height must be at least 85 cm.
Page EN-39
30 cm
0 cm
20 cm
20 cm