Page EN-18
Using standard functions
Using the oven mode
(1)
1. First, tap the
sensor (13) to exit other
functions.
2. To select the desired function, tap the
sensor (8) until the display shows the
desired function.
3. To change the temperature, use the
+/– sensors or the slider (7).
4. To change the cooking time, tap the
symbol (5) and use the +/– sensors or
the slider (7).
5. Continue as described in „Starting, inter-
rupting, continuing and ending".
Quick pre-heating
NOTICE
Risk of damage!
The oven door is closed during the pre-
heating process.
Never attempt to open the oven door
■
by force.
(1)
(9)
This function ensures that the oven reaches
the set temperature as quick as possible.
It is only available in the oven mode.
1. First, tap the
2. To select the desired function, tap the
3. To change the temperature, use the +/–
4. Tap the
(8)
5. Put the food in the oven.
Using the microwave mode
1. First, tap the
2. To select the microwave mode, tap the
3. To change the cooking time, use the +/–
4. To change the watts of power, tap the
5. Continue as described in „Starting, inter-
(8)
sensor (13) to exit other
functions.
sensor (8) until the display shows the
desired function.
sensors or the slider (7).
sensor (9).
The oven will begin to heat immediately.
Once preheating is complete, you will
hear a signal and the symbol will flash on
the display. Now, the oven door can be
opened.
(1)
(12)
sensor (13) to exit other
functions.
sensor (12).
The microwave symbol will be shown on
the display.
sensors or the slider (7).
sensor (12) and use the +/– sensors or
the slider (7).
rupting, continuing and ending".