Error while charging the product
LED on
Status
power
LED on
supply
battery
charger
Status
LED
The LED
ring is lit
in weak
purple
The LED
ring is lit
up yellow
Error
Country-specific plug adapter not
fully engaged on power supply
Non-functional socket
Defective power supply
No connection between battery
charger and power supply
Defective battery charger
Charging status
indicator (5 LEDs)
No LED is lit
LED 2 and 4 are lit up Charger excess tem
LED 1, 3 and 5 are lit
up
LED 3 is lit up
Resolution
Check whether the country-specif
ic plug adapter is fully engaged on
the power supply.
Check socket with another electric
appliance.
The battery charger and power
supply must be inspected by an
authorised Ottobock Service
Centre.
Check whether the charging cable
plug is fully engaged on the battery
charger.
The battery charger and power
supply must be inspected by an
authorised Ottobock Service
Centre.
Error
Distance between bat
tery charger and
receiver of the char
ging unit on the pros
thesis too great. If the
distance is more than
2 mm, the prosthesis
cannot be charged.
perature
Excessively high or
low temperature of the
prosthesis
The prosthesis is not
being charged
Distance between bat
tery charger and
receiver of the char
ging unit too great.
Resolution
Reduce distance
between battery char
ger and receiver of the
charging unit.
Check whether the
specified ambient con
ditions for charging the
battery are met (see
Page 90).
Connection may be
improved by reducing
the distance between
the charger and receiv
er of the charging unit.
95