Control Elements For Cockpit App - Ottobock Genium X3 3B5-3 Gebrauchsanweisung

INFORMATION
After activating the "visibility" of the component (holding the component with the sole of the foot
facing up, or connecting and then disconnecting the battery charger), the component can be
recognised by another device (e.g. smartphone) within 2 minutes. If registration or establishing
the connection takes too long, the process of establishing a connection is cancelled. In this
case, hold the component with the sole of the foot facing up again, or connect and then discon­
nect the battery charger.

7.3 Control elements for cockpit app

1
Product
2
1. Basic Mode 2. Golf
4
5
6
100% 1. Basic Mode
1. Call up the navigation menu (see Page 72)
2. Product
The component name can only be changed with the adjust­
change
3
ment software.
3. If connections to more than one component have been
saved, you can switch between the saved components by
tapping the entry change.
4. MyModes configured with the adjustment software.
Switching the mode by tapping the corresponding symbol
and confirming by tapping "OK".
5. Currently selected mode
7
6. Charge level of the component.
8
9
Component battery is being charged
The current charge level is also displayed in %.
7. Display and name of the currently selected mode (e.g. 1.
Basic Mode)
8. Mute mode is activated
9.
is attempting to re-establish the connection automatically.
Component battery fully charged
Component battery empty
Connection to component has been established
Connection to component has been interrupted. The app
71