Deep Sleep Mode; Turning Deep Sleep Mode On/Off Using The Cockpit App; Opg Function (Optimised Physiological Gait) - Ottobock Genium X3 3B5-3 Gebrauchsanweisung

8.6 Deep sleep mode

INFORMATION
When mute mode (silent mode) is activated, no beep and vibration signals are generated.
INFORMATION
If the Volume parameter is set to '0' in the Cockpit app, there are no beep signals (see
Page 77).
The Cockpit app can be used to place the knee joint into a deep sleep mode, in which power
consumption is minimised. The knee joint offers no functionality in this mode. The safety mode
damping values are activated.
It can be awakened from deep sleep mode with the Cockpit app or by connecting the battery
charger. Waking from deep sleep mode using the Cockpit app can take up to 30 seconds.
After ending deep sleep mode, the knee joint is in basic mode again.

8.6.1 Turning deep sleep mode on/off using the Cockpit app

Activating deep sleep mode
1) When the component is connected, tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Functions".
3) Tap the entry "Activate deep sleep mode".
4) Follow the on-screen instructions.
→ The activation of deep sleep mode is indicated by a short beep signal and a short vibration
signal, assuming that mute mode (silent mode) is not active.
Deactivating deep sleep mode
1) When deep sleep mode is active for the currently connected prosthesis, the Exit deep sleep
mode button automatically appears when the Cockpit app is started.
2) Tapping this button establishes a connection to the prosthesis and deactivates deep sleep
mode.
INFORMATION: Establishing a connection in deep sleep mode can take up to 30
seconds.
If a prosthesis is in deep sleep mode but not connected to the Cockpit app, a connection to the
prosthesis has to be established (see Page 72).

8.7 OPG function (Optimised Physiological Gait)

INFORMATION
The O&P professional can turn the "PreFlex" function on or off using the adjustment software.
All other parameters of the OPG function are always active and cannot be influenced.
The OPG function minimises the prosthesis wearer's prosthetic deviations from a harmonious gait
pattern and promotes more biomechanically correct walking. This function enables the following
features:
PreFlex
PreFlex ensures the knee is in 4° of flexion at the end of swing phase in preparation for loading
response. This makes initiating stance phase flexion easier and forward movement is less restric­
ted.
Adaptive yielding control
The knee joint has auto-adaptive stance and swing extension resistance. The stance flexion resist­
ance experienced by the user is dependent on the slope or incline when walking downhill. When
82