Signs And Stickers On The Machine; Noise Level; Choosing The Correct Pneumatic Breaker For A Task; Installation - Atlas Copco TEX 14PS Betriebsanleitung

Safety and Operating instructions
Signs and stickers on the
machine
Signs and stickers with important information about
personal safety and machine care are mounted on
the machine. The signs and stickers must always
be legible. New signs and stickers can be ordered
from the spare parts list.
The data plate contains the following
important information:
1. Machine type
2. Maximum permitted compressed air pressure
. Serial number
4. The warning symbol together with the book
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
5. The CE symbol means that the machine
is CE-approved. See the CE declaration
which is delivered with the machine for more
information.
nOTE! Certain machines in this range are
not CE-approved!
12

noise level

The noise level sign displays the guaranteed noise
level according to EC directive 2000/14/EC.
Choosing the correct
pneumatic breaker for a task
It is important to choose the correct size of
pneumatic breaker for the work to be performed.
A pneumatic breaker that is too small means that
the work will take longer.
A breaker that is too big means that there must be
frequent repositioning, which is unnecessarily tiring
for the operator.
A simple rule for choosing the correct size of
pneumatic breaker is that a normal sized piece
of broken material should be removed from the
workpiece within 10–20 seconds operation.
► If it takes less than 10 seconds a smaller
pneumatic breaker should be selected.
► If it takes more than 20 seconds a larger
pneumatic breaker should be selected.

Installation

Connections between the compressed air
source and the machine
1. Compressed air source
2. Water separator (optional)
. Lubricator (optional)
4. NOTE! Max.  meter compressed air hose
between the lubricator and the machine.
► Check that you are using the correct
recommended operating pressure, 6 bar (e).
© 2005 Atlas Copco Construction Tools AB
TEX P
| |
No. 9800 0650 90 2005-12-07