Noise And Vibration Declaration Statement - Atlas Copco ETD SR21-07-I06-PS Original-Produktanweisungen

ETD SR21-07-I06-PS
A
B
C
D
Safety Data Sheets MSDS/SDS
The safety data sheets describes chemical products
sold by Atlas Copco.
For more information, consult the website
http://www.atlascopco.com/.
Choose Products - Safety Data Sheets, and fol-
low the instructions on the page.
Directive 2006/42/EC
on Machinery specifies
the essential health and
safety requirements the
product has to meet in
order for the manufac-
turer to affix the CE
marking.
When operating the de-
vice be sure to use cau-
tion.
The symbol indicates
that parts within the
product must be handled
in accordance with the
WEEE Directive.
Read the instruction
manual/booklet before
starting work or before
operating equipment or
machinery.
© Atlas Copco Industrial Technique AB - 9836 7094 00
Decommissioning
Recycling instruction
When a product has served its purpose it has to be
recycled properly. Dismantle the product and recy-
cle the components in accordance with local legis-
lation.
Batteries shall be taken care of by your national
battery recovery organization.
Technical data
Technical data
Noise and vibration emission
Noise (in accordance
with ISO15744)
Sound pressure level
Sound power level
Uncertainty
This equipment is intended for fixtured applica-
tions. The noise emission is given as a guide to the
machine-builder. Noise and vibration emission
data for the complete machine should be given in
the instruction manual for the machine.
Noise and Vibration Declaration
Statement
These declared values were obtained by laboratory
type testing in accordance with the stated standards
and are suitable for comparison with the declared
values of other tools tested in accordance with the
same standards. These declared values are not ade-
quate for use in risk assessments and values mea-
sured in individual work places may be higher.
The actual exposure values and risk of harm expe-
rienced by an individual user are unique and de-
pend upon the way the user works, the workpiece
and the workstation design, as well upon the expo-
sure time and the physical condition of the user.
We, Atlas Copco Industrial Technique AB, can-
not be held liable for the consequences of using the
declared values, instead of values reflecting the ac-
tual exposure, in an individual risk assessment in a
work place situation over which we have no con-
trol.
Safety Information
dBA
<70
-
-
7