Machine Modification Hazard; Additional Safety Instructions; Protective Equipment - Atlas Copco TEX 14PS Betriebsanleitung

TEX P
► Do not grab, hold or touch the inserted tool
when using the machine.
► Participate in health surveillance or monitoring,
medical exams, and training programs offered
by your employer and when required by law.
note! See the "Noise & Vibration Declaration
Statement" for the machine, including the
declared vibration values and "Additional
vibration information". It is found at the end
of these Safety and Operating instructions.

Machine modification hazard

Warning
Any machine modification not approved by Atlas
Copco may result in serious injuries to yourself or
others.
The machine must not be modified without
►
Atlas Copco's permission.
► Use only original parts and accessories
approved by Atlas Copco.

Additional safety instructions

► Machines and accessories must only be used
for their intended purpose.
► T-handle breakers weighing 15 kg or more may
only be used for vertical breaking.
► Only qualified and trained persons may operate
or maintain the machine.
► Learn how the machine is switched off in the
event of an emergency.
► The maximum permissible air pressure for the
machine must not be exceeded.
► Release the start and stop device immediately in
all cases of power supply interruption.
► Always inspect the equipment prior to use. Do
not use the equipment if you suspect that it is
damaged.
► Always use your common sense and good
judgment.
► Pay attention and look at what you are doing.
► Do not use the machine when you are tired or
under the influence of drugs, alcohol or anything
else that may affect your vision, reactions or
judgment.
► Participate in safety and training courses.
► Never strike or abuse any equipment.
© 2005 Atlas Copco Construction Tools AB
►
►
►
►
►
►

Protective equipment

Always use approved protective equipment.
Operators and all other persons in the working
area must wear protective equipment, including at
a minimum:
►
►
►
►
►
►
| |
No. 9800 0650 90 2005-12-07
Safety and Operating instructions
Keep the machine and tools in a safe place, out
of the reach of children and locked up.
Make sure that all the attached and related
equipment is properly maintained.
Signs and stickers bearing important information
regarding personal safety and care of the
machine are supplied with every machine.
Make sure that the signs are always legible.
New signs and stickers can be ordered from the
spare parts list.
Make sure that no unauthorized personnel
trespass into the working zone.
Keep the workplace clean and free from foreign
objects.
Never point a compressed air hose at yourself or
anyone else. To avoid the risk of getting injured,
never use compressed air to blow e.g. dust, dirt
etc. from your clothes.
Protective helmet
Hearing protection
Impact resistant eye protection with side
protection
Respiratory protection when appropriate
Protective gloves
Protective boots
9