Safety and Operating instructions
Service and maintenance
Regular maintenance is a prerequisite for keeping
the machine safe and effective. Carefully follow the
operating instructions.
Before undertaking any maintenance or changing
the insertion tool on pneumatic machines, always
switch off the air supply and bleed the machine
by depressing the start and stop device Then
disconect the air hose from the machine.
►
Use only authorized parts. Any damage or
malfunction caused by unauthorized parts will
not be covered by Warranty or Product Liability.
►
Change damaged parts immediately.
►
Replace damaged and worn components in
good time.
►
For major service to the machine, contact your
nearest authorised workshop.
►
When cleaning mechanical parts with solvent,
make sure to comply with current health and
safety regulations and that there is satisfactory
ventilation.
Insertion tools
►
Keep the tools clean and in good condition.
Regulary check the insertion tools, make sure
that they are sharp and not worn out.
nOTE! The machine can be destroyed if you use
incorrect insertion tools.
10
© 2005 Atlas Copco Construction Tools AB
TEX P
|
|
No. 9800 0650 90
2005-12-07