Caring For Your Smartmonitor 2; Cleaning Instructions - Circadiance SmartMonitor2 Bedienungsanleitung

Use the information in this section to care for your SmartMonitor 2.
Use only Circadiance accessories with the SmartMonitor 2.

Cleaning Instructions

Turn the monitor OFF, unplug it from the electrical outlet, and disconnect all accessories before you begin cleaning.
Never immerse the monitor or any of the accessories in water or spray cleaner directly on them. Apply water or cleaner to a
soft cloth and gently wipe the components to clean them.
Monitor, Power
Cord/Battery Charger and
Safety Lead Wires
Electrodes
Soft Carrying Case
•
Use a clean cloth and any of the following to clean these components:
Unscented dishwashing detergent.
3% hydrogen peroxide solution (the kind found in most stores) to clean the
monitor unit.
91% Isopropyl alcohol (the kind found in most stores).
10% bleach solution.
Germicidal Cloth.
•
Do not attempt to clean the disposable style electrodes.
•
Clean the carbon electrodes with a mild soap and water.
•
They must be rinsed well to remove any traces of soap film. Soap film can prevent
heart and breathing signals from being picked up clearly from the monitor.
•
Insure that the electrodes are completely dry before using.
•
Although the care label in the carrying case suggests machine washing in warm
water, the appearance of the carrying case will change noticeably after washing.
• Circadiance recommends that you wipe the case with a damp cloth or sponge using
a light detergent, if necessary. Air-dry only.

Caring for Your SmartMonitor 2

Caring for Your SmartMonitor 2
47