Transferring Smartmonitor 2 Data To A Memory Card - Circadiance SmartMonitor2 Bedienungsanleitung

Transferring SmartMonitor 2 Data to a Memory Card

The Memory Card is a credit-card-sized electronic memory transfer device that transfers monitor data. This is an optional
feature of SmartMonitor 2 and may not be installed on every unit.
All data in the memory card at the time of a download will be overwritten.
Transferring SmartMonitor Information
When you are ready to use the Memory Card to
transfer SmartMonitor 2 data, follow the steps below:
•
Make sure the SmartMonitor 2 is off.
•
With the Memory Card facing you slide the card
into the slot provided on the side panel of the
SmartMonitor 2. The location of the memory
card logo will be on the bottom edge and facing
you. (See illustration).
•
Press the POWER button ON. After a short
delay, the display will read:
•
INITIALIZING PLEASE WAIT
Then,
MENU MODE? ENTER PROPER KEY
SEQUENCE
•
Press the keys in the following sequence within
10 seconds:
•
Press the ENTER button.
•
The display will read SMARTMONITOR 2 MENU
SELECTION.
44