Sound Field Programs; Selecting Sound Field Programs; Remote Control Operations - Yamaha RX-V2700 Bedienungsanleitung

SOUND FIELD PROGRAMS

This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from
almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field
processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.
y
• When you set the "Decoder Mode" parameter in "Input Select" to "Auto", this unit selects the appropriate digital decoder according to
the input signal.
• The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources.
• The YAMAHA HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in
actual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the reflections coming from
the front, back, left and right.
• You can select sound field programs and adjust the parameters by using the GUI screen. See page 79 for details.

Selecting sound field programs

Notes
• When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.
• Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input
source (see page 43) and Audio input jack select is set to "ANALOG" (see page 42).
• When you play back DSD sources with any sound field program, this unit converts the DSD signals to PCM signals and then applies
the selected program.
• When you play back DTS 96/24 sources with any sound field program, this unit applies the selected program without activating the
DTS 96/24 decoder.
• Sampling frequencies higher than 48 kHz are sampled down to 48 kHz or lower and then sound field programs are applied.
y
You can select the desired sound field programs and setting the parameters by using GUI screen. See page 79 for details.
Front panel operations
AUDIO TONE REC OUT/
CONTROL ZONE2 A/B/C/D/E
SELECT PRESET/TUNING
INPUT
STRAIGHT
MAIN ZONE
EFFECT
YPAO SILENT CINEMA
ON/OFF
PROGRAM OPTIMIZER
MIC PHONES
ON
OFF
MASTER
PROGRAM selector
Rotate the PROGRAM selector on the front panel.
The name of the selected sound field program appears in
the front panel display and in the short message display.
46
En
SOUND FIELD PROGRAMS
PURE DIRECT
VOLUME
PRESET/ MEMORY TUNING
FM/AM MODE ENHANCER
TUNING MAN'L/AUTO FM NIGHT
EDIT
ZONE ON/OFF ZONE CONTROLS
MULTI ZONE
ZONE 2 ZONE 3
S VIDEO VIDEO L AUDIO R OPTICAL
VIDEO AUX USB

Remote control operations

+ + +
TV VOL CH VOLUME
– – –
TV MUTE TV INPUT MUTE
PRESET/CH
LEVEL SET MENU
TITLE MENU
SRCH MODE
ENTER
A/B/C/D/E
DISPLAY
RETURN
MEMORY
CLASSICAL LIVE/CLUB ENTERTAIN
1 2 3
STEREO SUR. DECODE SELECT
5 6 7
1 MEMORY 2 NIGHT
+
10
9 0
Set the operation mode selector to AMP and then
press one of the sound field program selector
buttons on the remote control repeatedly.
The name of the selected sound field program appears in
the front panel display and in the short message display.
AMP
AMP
SOURCE
TV
PURE DIRECT
AUDIO
STRAIGHT
Sound field program
EFFECT
MOVIE
selector buttons
4
EXTD SUR.
8
ENHANCER
ENT