Manual Setup (Basic) - Yamaha RX-V2700 Bedienungsanleitung

Position (GUI screen position)
Use this feature to adjust the vertical and horizontal
position of the GUI screen.
Control range: –5 (downward/left) to +5 (upward/right)
Short Message
On Screen
Position
Wall Paper
• Press k to raise the position of the GUI display.
• Press n to lower the position of the GUI display.
• Press h to shift the position of the GUI display to the
right.
• Press l to shift the position of the GUI display to the left.
Wall Paper (Wall paper)
Use this feature to display the wall paper or gray
background in your video monitor when there is no video
signal being input.
Choices: None, Yes, Gray
On Screen
Position
Wall Paper
• Select "None" not to display any background in your
video monitor.
• Select "Yes" to display a background image (the
photograph of a piano) in your monitor when there is
no video signal being input.
• Select "Gray" to display a gray background in your
monitor when there is no video signal being input.
Note
When "Conversion" is set to "Off", no background is displayed
even if "Wall Paper" is set to "Yes".
/ :+5 / :-5
+
None
Yes
Gray
GRAPHIC USER INTERFACE (GUI) SCREEN

Manual Setup (Basic)

Use this menu to manually adjust any speaker setting.
1
Set the operation mode selector to AMP and
then press SET MENU on the remote control.
AMP
SOURCE
TV
2
Press k / n on the remote control to select
"Manual Setup" and then press h.
PRESET/CH
ENTER
A/B/C/D/E
3
Press k / n / l / h on the remote control to
select "Basic" and then press h.
PRESET/CH
ENTER
A/B/C/D/E
Sound
Video
Basic
NET/USB
Option
4
Select the desired parameters and then press
h to access and adjust.
PRESET/CH
ENTER
SET MENU
MENU
SRCH MODE
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
Test Tone
Speaker Set
Speaker Distance
Speaker Level
A/B/C/D/E
95
En