Manual Setup (Net/Usb) - Yamaha RX-V2700 Bedienungsanleitung

GRAPHIC USER INTERFACE (GUI) SCREEN
Speaker Level (Speaker level)
Use this feature to manually balance the speaker levels
between the front left or surround left speakers and each
speaker selected in "SPEAKER SET" (see page 96).
Speaker Set
Speaker Distance
Speaker Level
Control range: –10.0 dB to +10.0 dB
Initial setting:
Front L/Front R/Presence L/Presence R/
Subwoofer: 0.0 dB
Center/Surround L/Surround R/Surround Back L/
Surround Back R: –1.0 dB
Control step: 0.5 dB
• Select "Front L" to adjust the balance of the front left
speaker.
• Select "Front R" to adjust the balance of the front right
speaker.
• Select "Center" to adjust the balance of the center
speaker.
• Select "Surround L" to adjust the balance of the
surround left speaker.
• Select "Surround R" to adjust the balance of the
surround right speaker.
• Select "Surround Back L" to adjust the balance of the
surround back left speaker.
• Select "Surround Back R" to adjust the balance of the
surround back right speaker.
• Select "Presence L" to adjust the balance of the
presence left speaker.
• Select "Presence R" to adjust the balance of the
presence right speaker.
• Select "Subwoofer" to adjust the balance of the
subwoofer.
Notes
• You cannot adjust the level of channels set to "None" in
Speaker Set.
• If you are only using one surround back speaker, connect it to
the SURROUND BACK (SINGLE) jack, and adjust the balance
in "Surround Back L".
100
En
Presence R
Subwoofer
Front L
Front R
Center

Manual Setup (NET/USB)

Use this menu to adjust the network and USB system
parameters.
Video
Basic
NET/USB
Option
Network (Network settings)
Use this feature to view the network parameters (IP
address, etc.) or to change them manually.
Network
Play Style
Information
Note
The above display is an example.
DHCP (DHCP setting)
When this parameter is set to "ON", network parameters
for "IP Address", "Subnet Mask", "Default Gateway",
"DNS Server (P)" and "DNS Server (S)" obtained from a
DHCP enabled router are displayed. If DHCP server
function is not available, set this parameter to "Off" to
configure the network parameters manually.
Choices: On, Off
IP Address (IP address)
Use this parameter to specify an IP address assigned to
this unit. This value must not duplicate the one used for
other devices in the target network.
Subnet Mask (Subnet mask)
Use this parameter to specify the subnet mask value
assigned to this unit.
y
For most of the cases, the subnet mask value can be set as
"255.255.255.0".
Default Gateway (Default gateway)
Use this parameter to specify the IP address of the default
gateway.
Network
Play Style
Information
DHCP
IP Address
Subnet Mask