Status Message - Yamaha RX-V2700 Bedienungsanleitung

TROUBLESHOOTING
Problem
This unit does not recall
the selected item by using
numeric buttons (1-8).

Status message

Please wait.
Please wait
(Starting Server)
Connect error
Disconnected
Access error
Unable to play
136
En
Cause
The USB device is not connected
correctly.
The PC or MCX-2000 that stores the
selected item is turned off.
The selected Internet Radio station is
temporary unavailable or out of service.
Cause
This unit is in the middle of recognizing
the connection with your network.
This unit is in the middle of recognizing
the connection with your USB memory
device or USB portable audio player.
This unit is in the middle of waking up
MCX-2000 that has been set to the
standby mode.
There is a problem with the signal path
from your network to this unit.
Your USB memory device or USB
portable audio player has been
disconnected from the USB port of this
unit.
The PC server or MCX-2000 previously
connected to this unit no longer exists.
There is a problem with the signal path
from your USB memory device or USB
portable audio player to this unit.
This unit cannot access your USB
memory device or USB portable audio
player.
There is a problem with the signal path
from your USB memory device or USB
portable audio player to this unit.
This unit cannot play back the songs
currently stored on your PC.
The network may be overloaded with
heavy traffic, and playback is interrupted.
Remedy
Connect the correct USB device properly.
Turn on the PC or MCX-2000.
Try again when the selected Internet Radio is
providing the service.
Preset other Internet Radio stations.
Remedy
This is not a system malfunction. Wait for a
while.
This is not a system malfunction. Wait for a
while.
Wait for approximately 20 seconds.
Check the connection between this unit and the
LAN port on your router or hub.
Make sure your router is properly connected and
turned on. Also, make sure your modem is
properly connected and turned on when you are
attempting to listen to Internet Radio.
Check the connection between this unit and your
USB memory device or USB portable audio
player.
Connect this unit to the available PC server or
MCX-2000.
Turn off this unit and reconnect your USB
memory device or USB portable audio player to
the USB port of this unit.
Try resetting your USB memory device or USB
portable audio player.
Try another USB memory device or USB portable
audio player.
Turn off this unit and reconnect your USB
memory device or USB portable audio player to
the USB port of this unit.
Try resetting your USB memory device or USB
portable audio player.
Make sure Windows Media Connect 2.0 is
installed on your PC.
Check that the songs currently stored on your PC
are playable (MP3, WMA, and WAV).
Store some other playable music files (MP3,
WMA, and WAV) on your PC.
Try preparing a network exclusively for use with
this unit to separate it from general network
traffic.
See
page
72
70
71
72
See
page
—
—
—
30
30
—
70
34
—
—
34
—
—
—
—
—