Playing Video Sources In The Background Of An Audio Source; Using The Sleep Timer - Yamaha RX-V2700 Bedienungsanleitung

Playing video sources in the
background of an audio source
You can combine a video image from a video source with
sound from an audio source. For example, you can enjoy
listening to classical music while viewing beautiful
scenery from the video source on the video monitor.
Press the input selector buttons on the remote
control to select a video source and then an
audio source.
NET/USB
PHONO TUNER CD MULTI CH IN
V - AUX/DOCK
CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR 2 DVD
y
Set the "BGV" parameter in the "MULTI CH" menu to the
desired setting to select the default background video input source
of the MULTI CH INPUT sources (see page 88).

Using the sleep timer

Use this feature to automatically set the main zone to the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to the AC OUTLET(S) (see page 32).
1
Press one of the input selector buttons on
the remote control to select the desired input
source.
NET/USB
PHONO TUNER
V-AUX/DOCK CBL/SAT
DTV VCR 1
2
Start playback on the selected source
component or select a broadcast station.
Refer to the operating instructions for the source
component.
See page 56 for details about tuning instructions.
Audio sources
Video sources
CD MULTI CH IN
MD/TAPE CD-R
DVR/VCR 2 DVD
3
Press SLEEP on the remote control
repeatedly to set the amount of time.
Each time you press SLEEP, the front panel display
changes as shown below.
SLEEP
SLEEP 120min.
SLEEP OFF SLEEP 30min.
The SLEEP indicator flashes while you are switching
the amount of time for the sleep timer. Once the sleep
timer is set, the SLEEP indicator lights up in the front
panel display, and the display returns to the selected
sound field program.
SLEEP
STRAIGHT
Analog
Canceling the sleep timer
Press SLEEP on the remote control repeatedly
until "SLEEP OFF" appears in the front panel
display.
SLEEP
SLEEP
The SLEEP indicator turns off, and "SLEEP OFF"
disappears from the front panel display after a few
seconds.
y
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or MAIN ZONE ON/OFF on
the front panel) to set the main zone to the standby mode.
PLAYBACK
SLEEP 90min.
SLEEP 60min.
120min.
SLEEP
Flashes
SLEEP
Lights up
OFF
Disappears
45
En