Yamaha RX-V2700 Bedienungsanleitung Seite 29

Connecting an external amplifier
This unit has more than enough power for any home use.
However, if you want to add more power to the speaker
output or if you want to use another amplifier, connect an
external amplifier to the PRE OUT jacks.
Notes
• When you make connections to the PRE OUT jacks, do not
make connections to the SPEAKERS terminals.
• The signals output at the FRONT PRE OUT and CENTER PRE
OUT jacks are affected by the TONE CONTROL settings (see
page 52).
• Each PRE OUT jack outputs the same channel signals as the
corresponding SPEAKERS terminals.
• Adjust the volume level of the subwoofer with the control on
the subwoofer (see page 53).
• Some signals may not be output at the SUBWOOFER PRE
OUT jack depending on the settings for "Speaker Set" (see
page 96) and "Bass Out" (see page 98).
1 2
CENTER FRONT
SUB
WOOFER
PRE OUT
5
1 CENTER PRE OUT jack
Center channel output jack.
2 FRONT PRE OUT jacks
Front channel output jacks.
3 SURROUND PRE OUT jacks
Surround channel output jacks.
4 SURROUND BACK/PRESENCE PRE OUT
jacks
Surround back or presence channel output jacks. When
you only connect one external amplifier for the surround
back channel, connect it to the SINGLE (SB) jack.
y
• Set the "Surround Back" to "Large x2", "Large x1", "Small x2"
or "Small x1" and "Presence" to "None" (see page 97) to output
the surround back channel signals at SURROUND BACK/
PRESENCE PRE OUT jacks.
• Set the "Presence" to "Yes" and "Surround Back" to "None"
(see page 97) to output the presence channel signals at
SURROUND BACK/PRESENCE PRE OUT jacks.
5 SUBWOOFER PRE OUT jack
Connect a subwoofer with a built-in amplifier.
3 4
SURROUND SINGLE(SB)
L
R
SUR.BACK/
PRESENCE
CONNECTIONS
27
En