Frothing Milk With The Steam Nozzle - Coffeemaxx CM4625 Z 01327 Gebrauchsanleitung

• The brewing procedure is not stopped automatically. You must stop the brew-
ing procedure manually with the START/STOP switch as soon as you have
brewed the quantity of espresso you want.
• If the second control lamp from the left goes out during the brewing procedure,
you should interrupt the brewing procedure using the START/STOP switch.
As soon as the control lamp lights up again, the device has reached the re-
quired temperature and you can continue the brewing procedure by moving the
START/STOP switch to the "START" position.
16. Move the VORHEIZEN AN/AUS (PREHEAT ON/OFF) switch to the "AUS" (OFF) posi-
tion to switch off the device.
17. Empty the water drip tray at regular intervals to prevent it from overflowing.
20. Dispose of the espresso powder in the household waste.
Fold up the lever on the handle of the portafilter.
Hold the folding lever firmly in place with your thumb.
This will ensure that the filter cannot fall out of the portafilter while you are disposing
of the espresso powder in the household waste.
21. Then rinse the filter and portafilter under running water and follow the steps in the
"Cleaning" chapter.

Frothing Milk with the Steam Nozzle

To prepare a cappuccino, you require espresso and frothed milk. Frothing milk using the milk
frother nozzle takes a little bit of practice. Do not be discouraged if it does not work the very
first time. To froth milk, you must carry out the following steps:
01327_DE-GB-FR-NL_V1.indb 36
18. To remove the used espresso powder, turn the handle of the
portafilter to the left towards the open lock symbol.
19. Remove the portafilter by pulling it down and out.
36
30.09.11 10:58