Coffeemaxx CM4625 Z 01327 Gebrauchsanleitung Seite 35

6. Fill the filter completely with espresso powder. One batch of espresso powder is sufficient
for roughly 2 to 4 cups of espresso.
7. Smooth out the espresso powder and lightly compact it using the tamper on the measuring
spoon which is supplied.
8. Remove any excess powder from the edge of the filter. Make sure that you do not overfill
the filter. There must be no espresso powder above the height of the edge.
11. Place the espresso pot under the espresso discharge opening.
12. If you have preheated the device in the manner described in the "Preheating the Espresso
Machine" section, the VORHEIZEN AN/AUS (PREHEAT ON/OFF) switch should be in
the "AN" (ON) position and the first control lamp should be lit up.
13. Wait until the second control lamp from the left also lights up.
14. Move the START/STOP switch to the "START" position as soon as the second control
lamp from the left lights up. Espresso will flow through the espresso discharge opening.
15. Move the START/STOP switch to the "STOP" position as soon as you want to stop the
brewing procedure.
01327_DE-GB-FR-NL_V1.indb 35
5. Remove the portafilter by pulling it down and out.
9. Insert the portafilter into the espresso machine. The handle
must be aligned with the open lock symbol.
10. Turn the handle towards the closed lock symbol. Make sure
that the portafilter is secured in place.
35
30.09.11 10:58