Changing The Wheels - Device With 4 Wheels - Bosch HTD 6 serie Serviceanleitung

9.8 Changing the wheels – Device with 4
wheels
!
Secure the counterweight with a locking bolt before
tilting the post.
1. Place a sheet of paper or a large cloth on the floor to
avoid damaging the post.
2. Carefully lay the post on the floor.
3. Remove the screw from the wheel.
4. Remove wheel.
5. Attach new wheel.
Robert Bosch GmbH
Component replacement | HTD 6xx / HTD 8xx | 91
6. Secure the wheel with the screw.
en
|
1 692 106 011 2019-03-26