Mounting Vertical Alignment Lasers; Scope Of Delivery; Mounting The Holder For Vertical Alignment Laser - Bosch HTD 6 serie Serviceanleitung

8. Mounting vertical align-
ment lasers
!
For this alignment method with vertical alignment
laser, it is absolutely necessary to use the height-
adjustable track system for the beam setter!
i
For vertical alignment of the HTD 6xx / HTD 8xx, an
optional, green vertical laser can be mounted to the
column of the beam setter.
8.1

Scope of delivery

6
1 2
Fig. 21: Scope of delivery
1 Magnetic fastener (2x)
2 Vacuum cup holder (2x)
3 Pendulum with holder
4 Vertical alignment laser
5 Holder for vertical alignment laser
6 Rod with reflection table
Robert Bosch GmbH
Mounting vertical alignment lasers | HTD 6xx / HTD 8xx | 77
3 4
8.2 Mounting the holder for vertical
alignment laser
1. Demounting the alignment laser:
+
Loosen the lock nut from the alignment laser's
adjusting screw and unscrew screw from holder.
+
Unscrew fastening screws (2 x) from holder for
alignment laser.
2. Dismount cover plate from post.
3
Fig. 22: Loosening the cover plate from the post
5
1 Fastening screws (4x)
2 Adjusting screw alignment laser
3 Attachment holder alignment laser
1
2
|
1 692 106 011
en
2019-03-26