Checking / Calibration; Zero Point And Laser Visor - Htd 6Xx - Bosch HTD 6 serie Serviceanleitung

4.

Checking / calibration

4.1 Zero point and laser visor – HTD 6xx
1. Position the calibration triangle with the reference
mark centrally in front of the cross laser.
or
Position the calibration triangle with the reference mark
centrally in front of the calibration device.
Robert Bosch GmbH
Checking / calibration | HTD 6xx / HTD 8xx | 55
2. Position the beam setter behind the vertex of the
triangle.
or
en
|
1 692 106 011 2019-03-26