Bosch HTD 6 serie Serviceanleitung Seite 76

en 76 | HTD 6xx / HTD 8xx | Height sensor installation
6. Without pulling on it, unplug the connecting cable
from the holder in the light box.
7. Plug the connector into the height sensor.
|
1 692 106 011 2019-03-26
8. Position the height sensor on the screws and secure
it in place with the two M3 nuts.
9.
Attach the light box to the slide shoe.
Fig. 20: Underside of light box
1 Fastening screws
10. Calibrate the height sensor –
See section „4.7 Measuring instrument (height
sensor)".
Robert Bosch GmbH