Inserting/Changing The Batteries - Bosch UniversalDetect Originalbetriebsanleitung

Digital detector
A)
Max. detection depth
– Metals
– Single-phase live cables (110−240 V, 50−60 Hz,
B)
with voltage applied)
– Wooden substructures in dry walls
Operating temperature
Storage temperature
Operating frequency range
Max. magnetic field strength
Max. altitude
Relative air humidity
– <Metal> and <Wood> operating mode
– <Current> operating mode
Pollution degree according to IEC 61010-1
Batteries
Approx. operating time
Weight according to EPTA-Procedure 01:2014
A) Depends on operating mode, material and size of the objects, as well as material and condition
of the base material
B) Lower detection depth with non-live wires
C) equal to two plasterboard panels
D) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by
condensation is expected.
The serial number (7) on the type plate is used to clearly identify your measuring tool.
The accuracy and detection depth of the measuring result may be negatively af-
u
fected if the condition of the substrate is unfavorable.
Assembly

Inserting/changing the Batteries

It is recommended that you use alkaline manganese batteries to operate the measuring
tool.
Bosch Power Tools
English | 21
UniversalDetect
100 mm
50 mm
25 mm
–5 °C to +40 °C
–20 °C to +70 °C
48−52 kHz
16 dBµA/m
2000 m
30−80 %
< 50 %
2
4 × 1.5 V LR3 (AAA)
4 h
0.34 kg
1 609 92A 6H8 | (02.07.2021)
C)
D)