Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.4
Function keys
Keys
Functions
Cursor
Line selection.
Change of parameter within a line.
Enter
Storage of selected parameters.
Start of battery test.
Back / Print
Return to previous display
Move back one position on entering texts.
Printing of test results.
ON / OFF
Menu,
The <MENU> key provides access to the options
in the main menu (refer to Section 5.3).
Switch-on (only if there is no power supply via
battery clips)
Switch-off, however only if there is no power supply
via battery clips (to switch off, the key must be
pressed for longer than one second).
3.5
Display
Item
Designation
1
Display field
Display of test results, messages
and "Options" menu
2
Button bar
Shows which function keys are
currently available for use.
Robert Bosch GmbH
1
2
Function / notes
Description of unit | BAT 171 | 15
3.6
Changing paper in printer module
The thermal printer can only be used with heat-
sensitive paper on rolls with a width of 57 mm and
a maximum diameter of 25.9 mm (2.25" x 1.875").
1. Open the printer cover by carefully pressing the
release lever (Item 1) towards the display.
2. Remove the paper roll.
1
451000-41_Rf
1 Release lever (red)
2 Paper compartment
3 Paper sensor
3. Insert a new roll of paper in the compartment and
pull the paper forwards until it projects over the
tear-off edge at the paper slot.
4. Carefully close the cover and fasten again with
the lever.
3.7
Technical data
Function / range
Dimensions (WxHxD)
Weight
Operating range
Accuracy range
Degree of protection
Workplace-related noise emission
value (Lpa)
Battery test, voltmeter
Function / range
Operating voltage
Operating current without printer 0,4 A
Cold start current input range
Battery standards
BAT 171 | 15
| 15
en
2
3
Value
9.25 x 11.42 x 2.64 inch
100 x 280 x 70 mm
2,2 lb
1 kg
0 °C – 45 °C
32 °F – 113 °F
0 °C – 40 °C
32 °F – 104 °F
IP 20
< 70 dB(A)
Value
8 V – 16 V
50 A ... 1550 A
DIN, IEC, SAE, EN, JIS, CCA
|
1 689 989 061
2009-10-16
Werbung
Kapitel
Inhaltsverzeichnis
