AsViva RA6 O Benutzerhandbuch Seite 48

COMPUTERFUNCTION
CONSOLE FUNCTIONS
48
SPEED:
Displays your current pedaling speed as KM/Miles per hour.
RPM:
Displays your current pedaling speed as revolutions per minute.
TIME:
Count Up: If a target time was not selected, TIME will count up from 0:00 to
maximum 99:59 minutes.
Count Down: If you have set the target time (1:00 TO 99:00; 1 MINUTE
INCREMENT), the console will count down from that selected target time down to
0:00.
DISTANCE:
Count Up: If a target distance was not selected, this would measure the total
distance from 0.00 to 99.9 km/mile.
Count Down: If you have set the target distance (1.0 TO 99.0; 1 KM/MILE
INCREMENT), the console will count down from that selected target distance down
to 0.
CALORIES:
Displays total calories burned during the current exercise session.
Count Up: If a target calorie was not selected, this would measure the total calories
from 0 to 9999 cal.
Count Down: If you have set the target calorie (10 TO 990; 10 CAL INCREMENT),
the console will count down from that selected target calorie down to 0.
WATT:
Display the current power you produce at a given resistance level.
Display the current value of Watt during exercise.
Display range: 0 ~ 999.
LEVEL:
Displays torque/resistance level of the current program, from 1 to 32
torque/resistance level; 1 level increment.
PULSE:
Warning Reminder: If you have set the target pulse (30 TO 230 BPM (Beats Per
Minute; 1 BPM INCREMENT) and console buzzer will beep when actual heart rate
is over the target value during workout.
You must place both of your hands on the Pulse Sensors on the Handlebar. Your
pulse will be displayed approximately few seconds after the heart symbol "
displayed
If you do not place your hands correctly and a few seconds passes without a pulse
input, the console will turn off the pulse circuit. Place your hands back on the Pulse
Sensors correctly, the pulse readout will appear again
" is