AsViva RA6 O Benutzerhandbuch Seite 43

ASSEMBLY INSTRUCTION
Step 3
NOTE: Be careful to not damage the pulse sensor wires (73 & 74) while doing the assembly steps 1 to
3.
Step 1: Remove the button head bolts (114) from the seat carriage (64). Attach the handrail (70) onto
the seat carriage (64) with button head bolts (114).
Step 2: Attach the seat (68) onto the seat carriage (64) with the round head bolts (95). Attach the back
cushion (69) onto the seat carriage (64) with round head bolts (96).
Step 3: Turn the knob of the spring pin (67) counterclockwise and lock the knob in the release position,
refering to the insert drawing. Slide the seat carriage assembly (64) onto the rail (52). Press the rail cap
(55) into the back end of the rail (52). Insert the stopper bolt (54) through the rail (52) and rail cap (55)
to bolt them together with the stopper (53). Please verify that the other stopper bolt (54) at the front end
of rail (52) was assembled in the factory.
43