AsViva RA6 O Benutzerhandbuch Seite 42

ASSEMBLY INSTRUCTION
Step 2
Step 1: Attach the support bracket (60) onto the rail (52) with hex bolts (97). Press the nut caps (79)
onto nylon nut (105) and hex bolt (100).
Step 2: Remove hex bolt (103) and nylon nut (105) from the main frame (1). Attach the rail (52) onto
the main frame (1) by sliding the rail pivot (49) into the bracket on the main frame (1) and secure it by
using hex bolt (103) and nylon nut (105). Press the nut caps (79) onto hex bolt (103) and nylon nut
(105).
Step 3: Remove hex bolt (101) and nylon nut (105) from the main frame (1). Connect the lower end of
the support tube (56) to the main frame (1) with hex bolt (101) and nylon nut (105). Press the nut caps
(79) onto hex bolt (101) and nylon nut (105).
Step 4: Remove hex bolt (102) and nylon nut (105) from the rail (52). Attach the rear support (62) into
the rear support bracket (61) located on the rail (52) with hex bolt (102) and nylon nut (105). Lock the
rear support (62) in position with the pull pin (63). Press the nut caps (79) onto the hex bolt (102) and
nylon nut (105).
42