Yamaha DSP-A595 Bedienungsanleitung Seite 38

Faintly colored buttons do not function.
AMP/TUN
1
Indicator window:
Displays the names of
components which
can be controlled.
2
3
4
5
6
7
8
9
(TV POWER)
q
r
DSP
2
38
Note: TV POWER and TV VOLUME function if you have preset the code for your TV.
1
POWER
This button turns this unit on.
t
2
INPUT
Press these buttons to select the program source.
Indicator:
Flashes in red
3
EXT. DEC.
when the button
Press this button when using a external decoder.
is pressed.
4
SELECTOR DIAL:
A/B/C/D/E
Selects the
Press this button to select a group of preset stations when
component to be
using the YAMAHA tuner.
controlled.
5
DSP selector
Press this button. While the indicator lights up for about three
seconds, select a DSP program using the number buttons (1 to
8). No DSP program can be selected after the indicator goes off.
y
6
PRESET (+/–)
u
Press these buttons to select the preset station number when
using the YAMAHA tuner.
7
VOLUME (
Press these buttons to adjust the volume level.
(TV VOLUME)
8
MUTE
Press this button to mute the sound. To cancel mute, press this
button once more, or press the operation buttons of this unit.
9
SLEEP
p
Press this button to set the SLEEP timer.
a
q
This button is used to adjust the settings of the SET MENU
s
mode and the TIME/LEVEL mode.
r
TIME/LEVEL
Press this button to select the item in the TIME/LEVEL mode.
f
t
STANDBY
Press this button to turn this unit into Standby mode.
y
TEST
Press this button to output a test tone for adjusting the output
level of the speakers.
u
EFCT (EFFECT) ON/OFF
Press this button to switch the DSP program on or off.
p
(BACK)
Press this button to go back one selection in the SET MENU
mode and TIME/LEVEL mode.
a
This button is used to adjust the settings of the SET MENU
mode and the TIME/LEVEL mode.
s
(NEXT)
Press this button to advance one selection in the SET MENU
mode and TIME/LEVEL mode.
f
SET MENU
Press this button to select functions in the SET MENU mode.
2
DSP program
Press these buttons to select the DSP program (1 to 8). When
you select the input source, set the SELECTOR DIAL to the
AMP/TUN position.
Note: The function of all buttons other than DSP program is
)
(LEFT)
(RIGHT)
the same as with the AMP/TUN position.