Herunterladen Inhalt Inhalt Diese Seite drucken

IceTech TP3 Bedienungs- Und Wartungshandbuch Seite 58

Inhaltsverzeichnis

Werbung

Se si desidera si può ripetere nuovamente il ciclo di
riscaldamento, premendo il pulsante (1).
• Premere il pulsante (9) due volte, si accende il led
verde ed inizia il ciclo di mantecazione.
ATTENZIONE: Il livello della miscela
deve arrivare almeno a circa metà
piattello (fig. 1).
Non fare partire il ciclo di mantecazione
con il cilindro a secco (vuoto).
IMPORTANTE!
Una volta che la miscela è fuoriuscita dalla va-
sca, spingere il pomello (A) facendo combacia-
re la spina (B) nella sua sede (C - Fig. 2) e
ruotare in senso orario. Durante la mante-
cazione è possibile introdurre prodotti aggiun-
tivi tipo: granella, nocciole, ecc. attraverso la
tramoggia, aprendo il coperchio (D).
½
Fig./Abb. 1
5 8
TP3 - TP4 - TP5 - TP7
If so desired, it is possible to repeat the
pasteurization cycle by pressing button (1).
• Press button (9) twice; the green led comes on
and the whipping cycle begins.
WARNING: The level of the mixture must
reach at least half way up the pan (Fig. 1).
Never let the whipping cycle start when
the cylinder is dry (empty).
IMPORTANT!
After the mixture has been discharged from the
tank, push the knob (A), thus matching the pin
(B) into its seat (C - Fig. 2). Turn clockwise.
While whipping, you can pour additional
products, such as milled products, hazelnuts,
etc. through the hopper by opening the cover
(D).
C
B
A
Fig./Abb. 2
D

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Tp4Tp5Tp7

Inhaltsverzeichnis