Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35
Version 1.0
Published January 2016
Copyright©2016 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners' benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate"
ASRock Website: http://www.asrock.com

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK Z170M OC Formula

  • Seite 19 Z170M OC Formula...
  • Seite 27 Z170M OC Formula PIN6 VCORE: CPU CORE VOLTAGE PIN7...
  • Seite 35: Einleitung

    Z170M OC Formula 1 Einleitung Vielen Dank für den Kauf unseres ASRock Z170M OC Formula , eines zuverlässigen Motherboards, das nach ASRock strengen Qualitätsrichtlinien gefertigt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRock Streben nach Qualität und Beständigkeit erfüllt.
  • Seite 36: Technische Daten

    Celeron® der 6. Generation (Sockel 1151) • Digi Power design • 14-Leistungsphasendesign • Unterstützt Intel® Turbo Boost 2.0-Technologie • Unterstützt CPUs mit freiem Multiplikator der Intel® K-Serie • Unterstützt ASRock BCLK-Übertaktung (voller Bereich) • Unterstützt ASRock Hyper-BCLK-Engine • Intel ® Chipset Z170 • Dualkanal-DDR4-Speichertechnologie...
  • Seite 37 HDMI- und DisplayPort 1.2-Ports • 7.1-Kanal-HD-Audio mit Inhaltsschutz (Realtek Audio ALC1150-Audiocodec) • Erstklassige Blu-ray-Audiounterstützung • Unterstützt Überspannungsschutz (ASRock Full Spike Protection) • Unterstützt Purity Sound - Nichicon-Audiokappen der Fine Gold-Serie - 115-dB-SRV-DAC mit Differentialverstärker - TI® NE5532 – erstklassiger Headset-Verstärker (unterstützt...
  • Seite 38 • 2 x USB 2.0-Ports (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 1 x USB 3.1-Typ-A-Port (10 Gb/s) (ASMedia ASM1142) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 1 x USB 3.1-Typ-C-Port (10 Gb/s) (ASMedia ASM1142) (unterstützt Schutz gegen elektrostatische Entladung (ASRock...
  • Seite 39: Anschluss

    Z170M OC Formula • 1 x COM-Anschluss-Stiftleiste Anschluss • 1 x Betrieb-LED- und Lautsprecher-Stiftleiste • 2 x CPU-Lüfteranschlüsse (1 x 3-polig, 1 x 4-polig) (intelligente Lüftergeschwindigkeitssteuerung) • 3 x Gehäuselüfteranschlüsse (4-polig) (intelligente Lüftergeschwindigkeitssteuerung) * Der CPU-Lüfteranschluss unterstützt einen CPU-Lüfter mit maximal 1 A (12 W) Leistung.
  • Seite 40: Hardware-Überwachung

    Zertifizierun- • ErP/EuP ready (ErP/EuP ready-Netzteil erforderlich) * Detaillierte Produktinformationen finden Sie auf unserer Webseite: http://www.asrock.com Bitte beachten Sie, dass mit einer Übertaktung, zu der die Anpassung von BIOS-Einstellungen, die Anwendung der Untied Overclocking Technology oder die Nutzung von Übertaktung- swerkzeugen von Drittanbietern zählen, bestimmte Risiken verbunden sind.
  • Seite 41: Jumpereinstellung

    Z170M OC Formula 1.3 Jumpereinstellung Die Abbildung zeigt, wie die Jumper eingestellt werden. Wenn die Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „kurzgeschlossen“. Wenn keine Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „offen“. Die Abbildung zeigt einen 3-poligen Jumper, dessen Kontakt 1 und Kontakt 2 „kurzgeschlossen“ sind, wenn eine Jumper-Kappe auf diesen 2 Kontakten angebracht ist.
  • Seite 42: Integrierte Stiftleisten Und Anschlüsse

    1.4 Integrierte Stiftleisten und Anschlüsse Integrierte Stiftleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE Jumper-Kappen an diesen Stiftleisten und Anschlüssen an. Durch Anbringen von Jumper-Kappen an diesen Stiftleisten und Anschlüssen können Sie das Motherboard dauerhaft beschädigen. Systemblende-Stiftleiste Verbinden Sie Netzschalter, PLED+ PLED- (9-polig, PANEL1)
  • Seite 43 Z170M OC Formula Serial-ATA-III-Anschlüsse Diese acht SATA-III- (SATA3_0 Anschlüsse unterstützen siehe S. 1, Nr. 20) SATA-Datenkabel für (SATA3_1: interne Speichergeräte mit siehe S. 1, Nr. 22) einer Datenübertragungsges (SATA3_2: chwindigkeit bis 6,0 Gb/s. siehe S. 1, Nr. 21) SATA3_0 und SATA3_1...
  • Seite 44 USB 3.0-Stiftleisten Neben vier USB 3.0-Ports Dummy IntA_PA_D+ IntA_PB_D+ IntA_PA_D- (19-polig, USB3_5_6) an der E/A-Blende befindet IntA_PB_D- IntA_PA_SSTX+ (siehe S. 1, Nr. 11) sich eine Stiftleiste an IntA_PB_SSTX+ IntA_PA_SSTX- IntA_PB_SSTX- diesem Motherboard. Jede IntA_PA_SSRX+ IntA_PA_SSRX- IntA_PB_SSRX+ USB 3.0-Stiftleiste kann IntA_PB_SSRX- Vbus zwei Ports unterstützen.
  • Seite 45 Z170M OC Formula CPU-Lüfteranschlüsse Dieses Motherboard FAN_VOLTAGE (4-polig, CPU_FAN1) bietet einen 4-poligen CPU_FAN_SPEED FAN_SPEED_CONTROL (siehe S. 1, Nr. 38) CPU-Lüfteranschluss (lautloser Lüfter). Falls Sie (3-polig, CPU_FAN2) einen 3-poligen FAN_VOLTAGE (siehe S. 1, Nr. 3) CPU-Lüfter anschließen CPU_FAN_SPEED möchten, verbinden Sie ihn bitte mit Kontakt 1 bis 3.
  • Seite 46 Thunderbolt 3 DUMMY Bitte verbinden Sie eine I2C_DATA Erweiterungskarten Thunderbolt™-Erweiterungskarte I2C_CLOCK anschluss über das GPIO-Kabel mit diesem (10-polig, TBT2) Anschluss. (siehe S. 1, Nr. 35) *Bitte installieren Sie die Thunderbolt™-AIC-Karte am SLP_S4# SLP_S3# PCIE2 (Standardsteckplatz). PLUG_EVENT *Es wird nur eine FRC_PWR Thunderbolt-AIC-Karte an diesem Motherboard unterstützt.
  • Seite 47 Z170M OC Formula Kontakt 6 VCORE: CPU-KERNSPANNUNG Kontakt 7...
  • Seite 48 1.5 Intelligente Schalter Das Motherboard hat elf intelligente Schalter: Ein-/Ausschalter, Reset-Schalter, CMOS-löschen-Schalter, Schnellübertaktungstasten, Menütaste, Langsammodus- Schalter, BIOS-Auswahlschalte, LN2-Modusschalter, Direkttaste und XMP-Schalter. Ein-/Ausschalter Mit dem Ein-/Ausschalter (PWR) kann der Benutzer das System Power (siehe S. 1, Nr. 5) schnell ein-/abschalten. Reset-Schalter Der Reset-Taste ermöglicht (RST) das schnelle Rücksetzen des...
  • Seite 49 Z170M OC Formula Langsamer-Modus-Schalter Wenn der langsame Modus (SLOWMODE1) eingeschaltet ist, arbeitet der (siehe S. 1, Nr. 15) Prozessor bei niedrigster Frequenz. BIOS-Auswahlschalter Der BIOS-Auswahlschalter (BIOS_SEL1) ermöglicht dem System, von (siehe S. 1, Nr. 29) BIOS A oder BIOS B zu starten.

Inhaltsverzeichnis