Renishaw SP25M Bedienungsanleitung Seite 49

SP25M user's guide
http://www.renishaw.com
Module 'Crank down' distance
/ stylus using an extension*
holder between the stylus
holder and the crank
centre
SM25-4 255 mm
/
SH25-4
SM25- 205 mm
4A /
SH25-
4A
SM25- 225 mm**
4A /
SH25-
4A
SM25- 255 mm
4A /
SH25-
4A
SM25-5 35 mm
/
SH25-5
SM25-5 55 mm
/
SH25-5
SM25-5 80 mm
/
SH25-5
SM25-5 100 mm
/
SH25-5
* For example, use part number M­5000­3592 (20 mm long × M3 stainless steel extension)
** Representative test results for these configurations is shown in
*** This excludes the mass of the 20 mm extension
**** This excludes the mass of the 50 mm extension
***** This includes the crank down extension mass
Issued 10 2015
3D scanning 2D scanning and
Maximum 'crank point taking
out' distance Maximum 'crank
when measured out' distance
to tip of crank when measured
(star) stylus to tip of crank
(star) stylus
58 mm 83 mm
58 mm 83 mm
58 mm 83 mm**
58 mm 83 mm
108 mm 158 mm
108 mm 108 mm
108 mm 108 mm
83 mm 108 mm
SH25 stylus holder range metrology performance
Maximum 'down' Maximum
stylus (same as permissible
'effective stylus mass of crank
reach' - see (star) centre
straight styli) plus all styli
400 mm 8 g****
400 mm 11 g
400 mm 10 g***
400 mm 8 g****
100 mm 11 g*****
100 mm 10 g*****
100 mm 11 g*****
100 mm 12 g*****
Maximum
operating stylus
tip deflection for
above in any
orientation
0.4 mm
0.4 mm
0.4 mm
0.4 mm
0.3 mm
0.3 mm
0.3 mm
0.3 mm
49