Maintenance - Renishaw SP25M Bedienungsanleitung

SP25M user's guide
http://www.renishaw.com

Maintenance

Renishaw probes are intended for use in a protected metrology environment and therefore accumulation of dust or contamination should not
occur.
In common with all precision measuring equipment, regular inspection and cleaning is recommended to ensure continued high
performance.
Maintenance of the head is limited to wiping the outer surfaces and axes scale labels with a clean dry cloth or proprietary cleaning material.
Maintenance of the TP20 probe is restricted to the periodic cleaning of the kinematic couplings on the probe head and the probe module.
To aid cleaning of these couplings, the RTP20 is supplied with a Renishaw CK200 cleaning kit. Do not use any other cleaning method.
When operating the TP20 probe in environments subjected to air-borne contamination, the user should determine the frequency of cleaning
required.
Issued 10 2015
143