Herunterladen Inhalt Inhalt Diese Seite drucken

Renishaw SP25M Bedienungsanleitung Seite 17

Vorschau ausblenden Andere Handbücher für SP25M:
Inhaltsverzeichnis

Werbung

SP25M user's guide
http://www.renishaw.com
SP25M specification
Characteristic
Probe attributes
Measurement range
Overtravel range
X, Y
+Z
-Z
Resolution
Spring rate
Probe dimensions
Weight
SP25M body
SM25-1 scanning module
SM25-2 scanning module
SM25-3 scanning module
SM25-4 scanning module
SM25-5 scanning module
TM25-20 adaptor module
Effective stylus length range
(Always observe the specified stylus range for the scanning
module being used. Use Renishaw's M3 range of styli.)
SM25-1 + SH25-1
SM25-2 + SH25-2 / SH25-2A
SM25-3 + SH25-3 / SH25-3A
SM25-4 + SH25-4 / SH25-4A
SM25-5 + SH25-5
Mounting
Crash protection
±X, ±Y, ­Z
+Z
Signal outputs
Issued 10 2015
Requirements
Scanning with 3-axis measurement (X, Y, Z)
Touch-trigger probing using TP20 modules
±0.5 mm deflection in all directions in all orientations
±2 mm
1.7 mm
1.2 mm
Capable of <0.1 μm
Nominally 0.6 N/mm - when using a module's shortest specified stylus
Nominally 0.2 N/mm - when using a module's longest specified stylus
Ø25 mm × length dependant on module used
65 g (2.29 oz)
35 g (1.23 oz) (including SH25-1 but excluding stylus)
40 g (1.41 oz) (including SH25-2 but excluding stylus)
49 g (1.73 oz) (including SH25-3 but excluding stylus)
71 g (2.50 oz) (including SH25-4 but excluding stylus)
45 g (1.59 oz) (including SH25-5 but excluding stylus)
40 g (1.41 oz) (including TP20 STD module, but excluding stylus)
EWL 20 mm - 50 mm (0.79 in - 1.97 in) using 20 mm - 50 mm stylus range
EWL 50 mm - 105 mm (1.97 in - 4.14 in) using 20 mm - 75 mm stylus
EWL 120 mm - 200 mm (4.73 in - 7.88 in) using 20 mm - 100 mm stylus
EWL 220 mm - 400 mm (8.67 in - 15.75 in) using 20 mm - 200 mm stylus
EWL 20 mm - 100 mm (0.79 in - 3.94 in) using 20 mm - 100 mm stylus
Multiwired autojoint - compatible with PH10M PLUS / PH10MQ PLUS and
PH6M probe heads, extension bars and ACR1 / ACR3 sensor changers
Via break out of module or stylus holder
Via integral bump-stop design
Non-linear and non-orthogonal analogue outputs - rate gain and resolution
are not fixed
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis