System Adjustment - MICRO-EPSILON NLS3181 Betriebsanleitung

Installation and Assembly
Fig. 11 Dimensional drawing controller NLC3181.04 with con-
necting elements
4.9
If possible use
- the actual sensor mounting and
- the actual target.
i
NLS3181
150 (5.91)
138 (5.43)
Mounting holes for screws M4

System Adjustment

Calibrate the measuring systems of the NLS3181 for his particular application before
measuring, see Chap. 5.2 (Calibration).
If you cannot use the actual target, simulate the measuring environment as accurately as possible.
Power supply
Signal output
Sensor
Fig. 12 NLC3181.04
Page 48