Safety
1.
The handling of the system assumes knowledge of the instruction manual.
1.1
The following symbols are used in this instruction manual:
i
1.2
Connect the power supply in accordance with the safety regulations for electrical equipment.
> Danger of injury
> Damage to or destruction of the sensor / controller
Avoid banging and knocking the sensor / controller.
> Damage to or destruction of the sensor / controller
Protect the cables against damage.
> Failure of the measuring device
NLS3181
Safety
Symbols Used
Indicates a hazardous situation which, if not avoided, may result in minor or moder-
ate injury.
Indicates a situation which, if not avoided, may lead to property damage.
Indicates an user action.
Indicates an user tip.
Warnings
Page 32