MICRO-EPSILON NLS3181 Betriebsanleitung Seite 50

Operation
- Outer screaning mesh surrounds all cable wires
- Screen connected via connector housing to housing ground
- Recommended conductor cross-section 0.14 mm²
Signal GND
Fig. 13 Pin assignment 8-pole female cable connector, view on solder pin side
The EMC regulations are only satisfied under these basic conditions. PC3/8 is a 8 m long, pre-assembled
4-wire power and output cable. It is supplied as an accessory.
Pin assignment and color codes PC3/8
Pin
1
6
3
7
NLS3181
Take the 8-pole cable socket which is enclosed at the controller.
Use an A screened cable.
2
5 4
Signal
3 1
8
7
6
Cable color Assignment
white Power GND
green +24 Volt
green Signal, volltage output
blue Signal GND
0 V,
Power GND
24 Volt
outer cable area
with total screen
inner cable
3-wire with screen
Page 50