Oven Lifting - OEM START Gebrauchs- Und Instandhaltungshandbuch

Chapter 3
DANGER
All operations described in this chapter
shall be carried out by skilled and author-
ized technicians, only.
3.1 - OVEN LIFTING (Fig 1)
The oven lifting shall be carried out by using a crane or
a tackle as follows:
• The oven shall slightly alternatively be lifted from its
four sides using a lever and making sure the panels
are not damaged, then the oven shall be positioned
on shims (1).
• Insert two belts (2) being properly dimensioned ac-
cording to the weight of the oven, under the base (3)
of the latter and connect them with a hook (4) of a
crane or a tackle.
ATTENTION
To hoist the machine do not use steel belts
as they may damage the outside body.
EN - 10
FIG. 1
START
Installation and connections