Residual Heat Indication; Special Features; Alarm Clock - Pyramis 201045 Installations- Und Gebrauchsanleitung

2) Touch key again,
cooking end time.
cooking end time.
3) Adjust the desired end time using
3) Adjust the desired end time using
disappear whereas
disappear whereas
programmed and cooking will not start immediately.
programmed and cooking will not start immediately.
4) Touch key,
4) Touch key,
displayed on the timer display, together with symbol
displayed on the timer display, together with symbol
* Cooking with Meat Probe:
* Cooking with Meat Probe:
Meat probe is a sensor, connected to plug inside the oven and inserted into the meat to be
Meat probe is a sensor, connected to plug inside the oven and inserted into the meat to be
cooked. Using the meat probe, cooking is automatically ended when the meat reaches the
cooked. Using the meat probe, cooking is automatically ended when the meat reaches the
desired temperature.
desired temperature.
1) Select the desired function and adjust (if needed) the temperature as described
1) Select the desired function and adjust (if needed) the temperature as described
before in this document.
before in this document.
2) Touch key. The default value of the meat probe temperature will flash on the
2) Touch key. The default value of the meat probe temperature will flash on the
right two digits of the timer/meat probe display.
right two digits of the timer/meat probe display.
3) Adjust the desired meat temperature at cooking end in the range 20-99 ºC using
3) Adjust the desired meat temperature at cooking end in the range 20-99 ºC using
and keys.
and keys.
4) Touch ,
4) Touch ,
displayed on the left, the adjusted end temperature on the right portion of the
displayed on the left, the adjusted end temperature on the right portion of the
timer/meat probe display.
timer/meat probe display.
* Optional feature.
* Optional feature.
During Cooking:
During Cooking:
The 5 bars on the temperature display give an indication about the actual oven
The 5 bars on the temperature display give an indication about the actual oven
temperature. Each bar is assigned to 1/5 th of the adjusted value. The up-arrow near (˄) the
temperature. Each bar is assigned to 1/5 th of the adjusted value. The up-arrow near (˄) the
bar flashes, when the heating elements are currently active.
bar flashes, when the heating elements are currently active.
AUTOMATIC END OF COOKING
AUTOMATIC END OF COOKING
After cooking ends automatically, the temperature display will indicate the residual
heat, if any (see: Residual Heat Indication),
7 minutes. Touching

Residual Heat Indication:

After cooking has ended manually or automatically, if the internal oven temperature
is above 60 °C, 'down arrow' (˅) on the right side of heat bars flashes every 2 second and
also "hot" is displayed on the temperature display. Each one of the 5 heat bars symbolizes
now 60 °C. This indication goes on until the oven temperature falls below 60 °C.

SPECIAL FEATURES

Minute Minder Alarm:
In standby mode (when cooking something related)
the screen by tapping the left until it starts to blink.
seconds, then stops blinking. 7 minutes during the set time is reached, the alarm sounds.
The alarm can be stopped

Alarm Clock:

In standby mode (when cooking something related)
the screen by tapping the left until it starts to blink.
7 seconds, then stops blinking. The set time is reached, the alarm starts sounding. The
flashes on the timer screen together with the current
and
and
is still there, indicating that a delayed cooking is
is still there, indicating that a delayed cooking is
disappears, cooking starts. The cooking end time is
disappears, cooking starts. The cooking end time is
disappears, cooking starts. The actual meat temperature is
disappears, cooking starts. The actual meat temperature is
Page 5 / 8
Page 5 / 8
will cancel the latter.
or tapping the keys.
34
keys. on the status display may
keys. on the status display may
.
.
will appear on the screen.
will appear on the screen.
will be flashing and buzzer will sound for
key once to touch the icon
or keys to set the time using. 7
key twice to touch the icon
or keys to set the time using.
on
on