Pyramis 201045 Installations- Und Gebrauchsanleitung Seite 29

position will be deleted from the force if there is a cooking program. 0 00 is
displayed on-screen clock, the clock will need to be set. (See Time of Day
Setting)
Note: You do not operate your oven; do not forget to turn off the switch on the oven.
KEY LOCK
When activated in manual mode, your oven and the timer keys are blocked.
When activated as a cooking program is in progress, just the keys are blocked.
1) Touch and
for 1 seconds until 2 beep tones heard.
To deactivate the key lock, touch
Note: A buzzer tone during key lock can be cancelled by touching any button.
PROGRAMMABLE OPTIONS
PROGRAMMABLE OPTIONS
1- Time of day display 12h / 24h
1- Time of day display 12h / 24h
Factory setting is 24 h display. Touching
tone will be heard, the display mode toggles to 12 h mode (am / pm
Factory setting is 24 h display. Touching
indication) Doing this again will toggle back to 24 h
tone will be heard, the display mode toggles to 12 h mode (am / pm
2- Touch tones
indication) Doing this again will toggle back to 24 h
2- Touch tones
As a factory setting, touching buttons are accompanied by beep tones.
Touching the
As a factory setting, touching buttons are accompanied by beep tones.
and nt , which stays for no tone, will appear on the screen. Now, no touch
Touching the
tones will be heard any more. Doing the same until bt appears on the
and nt , which stays for no tone, will appear on the screen. Now, no touch
screen, which stays for button tone, brings you back to touch tones.
tones will be heard any more. Doing the same until bt appears on the
3- Screen Brightness Adjustment
screen, which stays for button tone, brings you back to touch tones.
3- Screen Brightness Adjustment
Touching
you into the display brightness mode. Display shows br 0x (x = 1 to 8). Now
Touching
every consecutive touch of the same button will reduce the brightness.
you into the display brightness mode. Display shows br 0x (x = 1 to 8). Now
There are 8 levels, thereafter the brightness starts to increase upon every
every consecutive touch of the same button will reduce the brightness.
touch. The same effect is also seen by holding this button touched. In 5
There are 8 levels, thereafter the brightness starts to increase upon every
seconds after releasing the button, the brightness level will be stored.
touch. The same effect is also seen by holding this button touched. In 5
Factory setting is maximum brightness.
seconds after releasing the button, the brightness level will be stored.
4- Buzzer Tone Selection
Factory setting is maximum brightness.
4- Buzzer Tone Selection
Touch button for 1 second, until you hear a double beep tone. Upon
every touch of this button within 5 seconds, you will hear a different tone.
Touch button for 1 second, until you hear a double beep tone. Upon
There are 3 different tones available. The tone last heard will be stored in
every touch of this button within 5 seconds, you will hear a different tone.
5 seconds.
There are 3 different tones available. The tone last heard will be stored in
5 seconds.
Note: Programmed options are nonvolatile. They will not be erased upon a
power interrupt.
Note: Programmed options are nonvolatile. They will not be erased upon a
power interrupt.
FACTORY SETTINGS
FACTORY SETTINGS
Buzzer: Highest sound tone
Brightness: Highest level
Buzzer: Highest sound tone
Beep tone: Active
Brightness: Highest level
Clock mode: 24 hours
Beep tone: Active
Clock mode: 24 hours
at the same time
and
button for 5 seconds, a double beep tone will be heard
button for 5 seconds, a double beep tone will be heard
button for 1 second, until you hear a double beep tone, brings
button for 1 second, until you hear a double beep tone, brings
4
2) The key symbol appears on the
4
Screen, key lock is active.
until key symbol disappears.
for 5 seconds, a double beep
for 5 seconds, a double beep
29
5