Technical Specifications - Pyramis 201045 Installations- Und Gebrauchsanleitung

Dear costumer,
Firstly thank you for purchasing our product.
Carefully read all instructions and warnings in this manual. These guides include important
information about your product safe installation, operation, maintenance and have warning
to take advantage of the most useful product.
Keep this guide in safe and easily available place when it becomes necessary.
Cause of Translation of this booklet from the manufacturer or its publication, resulting from
the incorrect use of the device, to people, to environment or other materials can not be held
liable for damages.
This manual also applies to other models. Differences between models are identified in
the manual.

TECHNICAL SPECIFICATIONS

The ovens are designed to operate with a monophase alternating current of 220-240V AC
50Hz. Anyway, before the installation of the appliance, we suggest you to check always the
specifications on the rating label applied on the front bottom side of the oven.
External Dimensions (OVEN)
( Height / Width / Depth )
Installation Dimensions (OVEN)
( Height / Width / Depth )
External Dimensions (HOB)
( Height / Width / Depth )
Installation Dimensions (HOB)
( Width / Depth )
Power input oven
Power input hob
Total power input
Fuse
Input Voltage / Frequency
Current (Amp)
*See Installation.
The values vary by product model below. All parts are available with the product.
Oven upper heating element
Oven lower heating element
Circular Heating Element
Grill heating element
Turbo fan motor
Spit motor
Cavity cooling fan
Oven light
Energy efficiency class #
#Basis: In electrical ovens, the data on energy labels are in conformity with EN 60350-1.
Values were determined under standart load and convection/hot aie (if available).
595mm / 595mm / 570 mm
*580 or 590 mm / 560mm / min.550 mm
55mm / 590mm / 520 mm
560mm x 490 mm
2072 W
6000 W
8072 W
3 x 16 A
220-240V AC 50Hz 380-415V AC 50Hz
min. 16 A
900 W
1100 W
2000 W
1800 W / 2000 W
22-30 W
6 W
18-22 W
25 W
A
3