Automatic Cooking - Pyramis 201045 Installations- Und Gebrauchsanleitung

listed below:
050-120 ºC
121-200 ºC
201-250 ºC
In half and full automatic cooking, as described later, cooking is ended automatically
depending on the parameters entered by the user before initiating cooking (by touching
)
TO PAUSE, EDIT or END COOKING
Touching
flashing, whereas other portions of the display remain the same. All oven heating elements
and turbo fan are disabled temporarily. Cooking is paused.
To end cooking, touch
disappear. The temperature display will indicate the residual heat, if any (see: Residual
Heat Indication).
Note: After cooking has ended, touching
settings on the screen, by a second
To edit the cooking parameters (Function, Temperature, etc), use the appropriate buttons
as described in this document. Touching
parameters.

AUTOMATIC COOKING

Automatic cooking means, that cooking will end automatically according to the parameters
you tell the control after selecting the cooking function and temperature but before
touching .
Tımed-Duratıon Cooking:
This method is used when no * meat probe is used and you want to start cooking
immediately, entering the desired cooking duration.
1) Select the desired function and adjust (if needed) the temperature as described
before in this document.
2) Touch key.
3) Adjust the required cooking duration using
status display. (If duration is brought to 0:00, two warning beeps occur)
4) Touch key,
displayed on the timer display, together with symbol
Delayed Cooking:
This method is used when no * meat probe is used and you want the food to be ready at a
certain time in future. Therefore, this method called 'Delayed Cooking'
1) Go through steps 1 to 3 of tımed-duratıon cooking (setting the cooking duration)
2) Touch key again,
cooking end time.
3) Adjust the desired end time using
disappear whereas
programmed and cooking will not start immediately.
4) Touch key,
displayed on the timer display, together with symbol
* Cooking with Meat Probe:
10h
6h
3h
during cooking interrupts the cooking progress and
once again, all cooking related indications on the display
touch, cooking may be initiated again.
will flash on the timer screen.
disappears, cooking starts. The cooking end time is
Page 4 / 8
flashes on the timer screen together with the current
is still there, indicating that a delayed cooking is
disappears, cooking starts. The cooking end time is
brings the previous function and temperature
will restart cooking with the edited
and keys.
.
and keys. on the status display may
.
33
starts
appears on the