Edirol M-100FX Bedienungsanleitung Seite 34

Audio/Voice effects
3.
POWER COMPRESSOR
This effect can boost a thin voice that has insufficient low range, giving it
more power. It can also give consistency to a voice that varies widely in
volume, or give more prominence to a voice that tends to be obscured by
other sounds.
If the volume is already sufficient and there are no other sounds that obscure
the voice, avoid applying this effect excessively. Doing so may increase the
noise, or suppress loud sounds, making the sound muffled.
A. BASS
This boosts or suppresses the low-frequency region of the voice. Turning
effect knob A toward the right will produce a stronger emphasis. You can
use this to augment the low frequencies for a voice that was recorded at a
distance away from the mic.
B. COMPRESS
This reduces the volume difference between loud and soft sounds, raising
the overall volume. As you turn effect knob B toward the right, sounds will
tend to be adjusted to a higher level. Unlike simply increasing the volume,
this prevents high-volume sounds from distorting.
4.
RICH CHORUS
This effect adds a "chorus" effect produced by adding a pitch-modulated
sound to the original sound, creating a spacious sensation. It can be used to
produce fantasy-like effects that have a reduced sense of direction, or to add
the impression of a backing chorus to vocal harmony.
A. RATE
Adjusts the rate of modulation. Turning effect knob A toward the right will
produce faster modulation.
B. DEPTH
Adjusts the depth of modulation. Turning effect knob B toward the right
will produce deeper changes in the pitch and volume, creating a more
intense modulation effect.
Generally, the modulation rate can be set to a fairly slow speed, and if you
want to add the feeling of a backing chorus, set the modulation depth to a
setting only slightly to the left of center. Use deeper settings if you want to
create a spacious, fantasy-like effect.
34
If the input sound is too
low in volume, the effect
will not be strong. Make
the input sound louder.