Applying Effects - Edirol M-100FX Bedienungsanleitung

Applying effects

Using the NARRATION ENHANCER
Here's a typical example of how you can use a mic to add realtime
commentary to video that you recorded, and re-record the video and sound
on another video deck.
fig.mic-1
Mic
1.
Turn all input level knobs and input level faders down to the minimum
position, and connect your monitor speakers or headphones.
(→Connecting monitor speakers or headphones (p. 19))
2.
Connect the audio output of your video camera to the M-100FX's line input
jacks 3/4.
Audio output is usually the red and white plugs.
3.
Connect the video output of your video camera to the video input jack of
your video deck.
Video is usually the yellow plug.
4.
Connect the M-100FX's master output jacks to the line input jacks of your
video deck.
If you want to adjust the audio from your video camera, use the CH 3/4
input level fader to adjust the input level.
5.
Connect your mic to mic input jack 1 (CH1), and adjust the gain and level.
(→Connecting a mic (p. 20))
6.
Make effect settings.
In this example, we'll use the [1] NARRATION ENHANCER effect, which is
particularly suitable for narrations.
1. Press the CH 1 effect switch to turn it on. It will light in red.
2. Turn the audio/voice effect knob to [1] NARRATION ENHANCER.
108
Video camera
Video deck
Headphones
If your cable has a different
type of plug, you may need
to obtain an adaptor plug
or a different cable.
Equalizer LO knob
Turning this toward the left
of center will reduce breath
noise, making the sound
more listenable.
Reverb/AUX send level
knob
Turn this all the way to the
left and no reverb will be
applied, thus preserving
the clarity of the voice.