Basic Operation; Connecting Monitor Speakers Or Headphones; Adjusting The Volume - Edirol M-100FX Bedienungsanleitung

Basic operation

The M-100FX provides numerous connectors that can be connected to a wide variety of devices. This
section explains how to connect the M-100FX with speakers, mics, audio devices, or your computer.
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off
the power on all devices before making any connections.
* Always make sure to have the volume level turned down before switching on power. Even with the volume all the
way down, you may still hear some sound when the power is switched on, but this is normal, and does not indicate
a malfunction.
* This section explains the devices that can be connected to the M-100FX, and any points of caution you must
observe. For details on how you can use various combinations of connected devices, refer to Applications
(p. 105).

Connecting monitor speakers or headphones

First we will connect equipment that will let you hear the sound.
Connect monitor speakers or headphones so that you can hear the sound you are mixing. Connect
your monitor speakers to the monitor output jacks, or headphones to the headphone jack.

■ Adjusting the volume

fig.mic4
1.
If you have connected monitor speakers,
raise their volume to an appropriate
level.
2.
Turn the monitor volume knob or
headphone volume knob toward the
right to adjust the volume as desired.
• Connecting a mic..........................................................(p. 20)
• Connecting audio devices .........................................(p. 23)
• Connecting the M-100FX to your computer ..........(p. 25)
• Using the external input/output jacks (AUX).........(p. 28)
• Using the digital output jacks ...................................(p. 30)
Monitor speakers
Stereo headphones
fig.basic
The monitor output jacks provide both phone
type and RCA phono type connectors. The
same signal is output from both types of
connector. Use the connectors that are suitable
for the cables you are using with your monitor
speakers. If plugs are inserted into both the
phone jacks and RCA phono jacks, sound will
be output only from the phone jacks.
* Before you connect monitor speakers or
headphones, turn the monitor volume knob
or headphone volume knob, as well as the
volume of your monitor speakers, all the way to
the minimum position.
19