Edirol M-100FX Bedienungsanleitung Seite 27

* Depending on your recording software, the signal that is being input for recording
may be sent directly back to the USB audio output. In this case, a feedback loop will
occur with the M-100FX's USB audio input, possibly producing a squealing noise
or distortion. To prevent this, you can either set your recording software to stop
outputting to USB, or turn the M-100FX's USB input level knob all the way to
the left (the 0 position).
* The master volume fader controls the volume of the digital output and the level
(volume) at which the mixed signal is sent to USB. If you want to adjust the volume
of your monitor speakers independently of the recording level, connect your monitor
speakers to the M-100FX's monitor output jacks (analog) and use the monitor
output knob to adjust the volume.
Basic operation
27