Edirol M-100FX Bedienungsanleitung Seite 117

5. NOISE REDUCER
fig.noise-a_70
■ Default settings
These settings cut the noise during silent portions of the program. If you want to cut the noise to a
greater extent, turn effect knob B toward the right. If a portion of the desired sound is being cut,
turn effect knob B toward the left.
fig.noise-1
■ Removing hum noise
These settings cut the buzzing hum noise produced by electronic devices. If the electrical power in
your area is 50 Hz, turn the knob toward the left to cut the hum. If your electrical power is 60 Hz,
turn the knob toward the right.
fig.noise-2
50Hz 60Hz
Effect applications
117