Driver Settings - Edirol M-100FX Bedienungsanleitung

Using Advance mode

Driver settings

Windows XP/2000/Me
Set the Default Device for Sound Recording and Playback (in Windows 2000/Me, [Default Device]) as follows.
Sound recording
Sound playback
→ For details on how to make this setting, refer to Specifying the audio input/output destination (p. 131).
Windows 98
Set the [Default Device] for playback and recording as follows.
Playback
Recording
→ For details on how to make this setting, refer to Specifying the audio input/output destination (p. 131).
■ About the input/output devices
Output devices
EDIROL M-100FX Out
This sends audio data from the computer to the M-100FX. This is the setting you will normally use, such as when
using the M-100FX with Media Player. You will also select this setting when using an application such as SONAR
in WDM driver mode, or when using a Direct Sound application.
MME Out EDIROL M-100FX
This sends audio data from the computer to the M-100FX. Use this setting if you are using the M-100FX with an
application that does not have a WDM driver mode, or if you want to use 24-bit audio with an application does
not support ASIO (such as Cool Edit).
* Windows XP/2000 only
Input devices
EDIROL M-100FX In
This receives audio data sent by the M-100FX to the computer. This is the setting you will normally use, such as
when using the M-100FX with Media Player. You will also select this setting when using an application such as
SONAR in WDM driver mode.
MME In EDIROL M-100FX
This receives audio data sent by the M-100FX to the computer. Use this setting if you want to use 24-bit audio
with an application that does not have a WDM driver mode or does not support ASIO (such as Cool Edit).
* Windows XP/2000 only
ASIO device
If you are using the M-100FX with an ASIO-compatible application such as Cubase, select "EDIROL M-100FX"
as the ASIO setting on your application.
* To prevent an audio oscillation loop or double monitoring, turn monitoring Off in your application, or use ASIO Direct
Monitor.
ASIO Direct Monitor
Sine the M-100FX's INPUT is always monitored, the M-100FX does not support ASIO Direct Monitor. Support is simulated in
order to improve usability.
166
EDIROL M-100FX Out
EDIROL M-100FX In
EDIROL M-100FX Out
EDIROL M-100FX In