Adjusting The Input Level (Volume) - Edirol M-100FX Bedienungsanleitung

Basic operation

■ Adjusting the input level (volume)

After you have made connections, here's how to adjust the volume
appropriately for recording.
Set the input level faders, master volume fader, and USB input level
knob to their minimum positions. If you have connected headphones, set
the headphone volume knob to the minimum position.
1.
Set the master volume fader to the middle of the area
indicated in black on the panel.
fig.mic2
2.
While playing back audio on your computer, slowly turn the
USB input level knob toward the right to increase the level.
Set the level so that the yellow LED (0 dB) of the master
volume indicator lights occasionally.
fig.mic3a
If you have connected devices to more than one line input jack (channel) and
want to record them, raise the input level faders of all these channels to
adjust their levels.
3.
If you are recording the audio signal on your computer, make
adjustments in your software so that the recording level is
appropriate.
The master volume fader adjusts the volume of the audio that is sent from
the M-100FX's USB connector to your computer.
26
Set the fader
in this area
Yellow LED
blinks
For details on adjusting the
mic input level, refer to
Connecting a mic (p. 20).
If you are inputting
(recording) audio into your
computer, it is a good idea
to make a note of the
position of the USB input
level knob. You may need
to turn down the USB
input level knob while
recording.