Edirol M-100FX Bedienungsanleitung Seite 136

Connecting the M-100FX to your computer
9.
In order to check that detection has been completed, once again go to
"Apple System Profiler", and select "Update all information" from the
Commands menu.
In the USB area, three audio devices will be displayed.
fig.05-37e_60
If these are displayed correctly, driver installation has succeeded.
10.
In the File menu, click Quit to close "Apple System Profiler".
If they are not displayed correctly, disconnect the M-100FX, wait for about
ten seconds, and then repeat the procedure from step 2.
Next, you will need to make the driver settings.
(→Settings the sound input/output (p. 137))
136